Generator

The cantilever test

A strip of cloth pushed out over an edge until its tip has drooped to the stated angle. The overhang at that moment gives the bending length, and cubing it with the mass per unit area gives the flexural rigidity.

3 essays call cantilever. The drawing above is what it returns with no arguments at all; every call below passes it something, because a placement that passes nothing draws whichever member of the family the generator happens to default to rather than the weave its essay argues about.

Where it is called

Changing this generator changes every one of these figures.

The cantilever test. A strip of cloth pushed out over an edge until its tip has drooped to the stated angle. The overhang at that moment gives the bending length, and cubing it with the mass per unit area gives the flexural rigidity.

Mechanics and drape

Bending stiffness and the drape coefficient

Two standard measurements try to say how a fabric hangs. One measures a length and cubes it; the other measures an area and, on the geometry, turns out to be answering a different question from the one it is asked.

Wrinkles 127 mm apart. A 300 mm width of a 120 g/m² cloth whose bending length is 20 mm, held under 5 newtons per metre across it and compressed. It cannot carry the compression in the plane, so it leaves the plane, at a wavelength the bending rigidity and the tension settle between them: 127 mm, which is 2.4 wrinkles across the width. The amplitude is drawn and is not computed — this arithmetic sets the spacing and says nothing about the depth.

Mechanics and drape

A cloth cannot carry a push

The net model that runs this site's mechanics has no bending stiffness at all, so it buckles under any compression whatever, into wrinkles of any wavelength whatever. What picks the wavelength is the competition the net leaves out — and the answer is a quarter power, which is why a wrinkle is so hard to change.

How hard a fabric is to bend, per unit width. Bending rigidity in micronewton metres per unit width, computed the same way for eight woven cloths and for a jersey in each of its two directions: the yarn's own rigidity, times the length of yarn per unit area, times the fourth power of the cosine of the angle each element makes with the bending direction. The knit lands inside the band of the woven cloths rather than below it, which is worth knowing because a knit is usually called the softer fabric. It is not softer to bend; it is softer to stretch, by three decades. What it does have is direction: 2.17 to one between its two axes, where a balanced plain weave is near one, and the soft axis is the one a jersey rolls about at its top and bottom edges.

Mechanics and drape

A knit bends more easily along its courses

A jersey is not a soft fabric to bend. Computed the same way as this collection's woven cloths it lands inside their band, at the limp end — and the useful number is not the magnitude but the direction: two point two to one between its two axes, with the soft one being the axis it rolls about.

The whole library · All essays