Textile Structure
how cloth is put together
Generator

Balanced, and not

Balanced, and not
Balanced, and not. Three weaves in section along one warp end, with the share of the face each thread system takes. The share is the mean of the matrix; what follows from it — which system wears, which carries the colour — does not follow from the matrix at all.

Three weaves in section along one warp end, with the share of the face each thread system takes. The share is the mean of the matrix; what follows from it — which system wears, which carries the colour — does not follow from the matrix at all.

2 essays call balance. The drawing above is what it returns with no arguments at all; every call below passes it something, because a placement that passes nothing draws whichever member of the family the generator happens to default to rather than the weave its essay argues about.

Where it is called

Changing this generator changes every one of these figures.

Balanced, and not. Three weaves in section along one warp end, with the share of the face each thread system takes. The share is the mean of the matrix; what follows from it — which system wears, which carries the colour — does not follow from the matrix at all. Setting and geometry

Balance, and what an unbalanced cloth does

How much of the surface each thread system takes is the mean of the weave matrix, and it is one of the very few quantities in this subject that can be read straight off. Almost nothing that follows from it can.

 Cover, dry and wetted. Warp cover for every cloth in the table when its threads swell by 20% and its spacings are held, with the dry value and the sett at which the swollen threads touch beside each bar. Cover is a diameter over a spacing and only the diameter moves, so every cover is multiplied by exactly 1.20 and every jamming sett divided by it — an identity rather than a result, and the one statement in this ladder a reader can check by hand. No cloth here reaches a cover of one, so none of them jams laterally on wetting; the closest is the sheeting at 0.628. What the bars cannot show is the through-thickness condition, which the sheeting fails at a swelling of half this one. Setting and geometry

A wet cloth is set closer than it was woven

Cover is a diameter over a spacing. Wetting moves the diameter and does not move the spacing, so every cover factor on this site is multiplied by exactly the swelling ratio and every jamming sett divided by it — which is an identity, and the one statement in this ladder a reader can check by hand.

The whole library · All essays